One of the best ways to update the aesthetic look of a home is by installing new windows. Not only do newer windows help to give the home a more modern look and feel, but it can also greatly improve the overall conservation of energy within the home. For many weekend warriors, the idea of completing the window installation without professional help may seem appealing; for those, this article discusses the basic steps to installing new windows.

First Things First…

For the most part, window openings in homes have already been framed out with wood, so the first step is to make sure that the rough window opening is symmetrical. This is easily done by taking a few side-to-side and top-to-bottom measurements. They should all come out in about the same range in terms of width and length; but if not, adding some tapered filler strips usually does the trick.

Installing the Window for Proper Placement

Once the opening is set and ready, the next step is to add the actual window into the frame opening. This is done by installing the window from the outside in; this way it sits flush to the wall. Either the person installing the window or someone inside the home can also check to make sure the window is level within the window frame opening in the interior.

Inserting the Flashing

A flashing band is used around the perimeter of the window, and this is done by nailing it into place starting on the outside of the window first. In order to make sure that the window stays level and in place, a shim can either be glued into place or tacked in with a trim nail. Once the shims are set into place, the final step can now be taken.

Finishing the Window

With shims in place to steady the window, the last step is to nail the window into place from the outside. Any excess shim can also be trimmed down so that it sits flush with the window itself; a flush-cut saw can make easy work of this step. Insulation is then added to any gaps between the window and the frame; fiberglass insulation works particularly well for keeping air from escaping.

These are the basic steps one would take to install a window. Of course, after reading these instructions, some homeowners may prefer to leave the task to the professionals. United Home Experts can help; the company specializes in window installation and a variety of other home improvement projects for those living in the Eastern New England area.section_landingpage_andersen_windows1-resized-600

Those that are really looking to take on this project themselves should first get a detailed set of instructions from the window manufacturers. This set of instructions is strictly to get an idea of the process. We are not responsible for any accidents, warranty voids or mishandling. We highly recommend allowing professionals, like ourselves, to replacing your windows. We offer the best warranties and coverage, aside from manufacturers, for replacement windows that are available to homeowners in the New England area.

Discussing with the house painters what color combinations to use in various areas of the house is no easy task.  The number of possibilities is quite daunting that many feel at a loss.  They often wonder where they should start, what works, and whether the completed project will be something they will like.

There are three traditional ways of combining and matching color that has remained effective even in this modern era.  These are monochromatic, analogous, and complementary.  For the latter two, a color wheel is needed.  Aside from these, there is a new way to choose paint color combinations by using fabric one likes as inspiration.

Monochromatic Combinationssw-levelbprocolorcollection-resized-600

A monochromatic combination utilizes two or three colors that are different shades of the same hue.  This means that a bold shade of green is combined with a lighter shade of the same color to achieve the monochromatic effect.  This combination gives the room a well-coordinated look and is a favorite among interior designers because of its polished feel.  It is also a nice choice if one is partial to a particular color.

Analogous Combinations

An analogous combination makes use of hues that are found side by side on the color wheel.  These colors are close enough that they create a certain balance between them.  A good example of this is painting one wall gray-green sage and the adjacent wall deep royal blue.  These colors produce a cool ambiance as well as a balanced feel to their pairing.  Analogous combinations that involve colors with red pigments produce a warm atmosphere.

Complementary Combinations

Utilizing hues on opposite sides of the color wheel is how one produces a complementary combination.  Examples of such pairings are yellow and violet, orange and blue, and red and green.  The contrast makes each hue appear more pure as a color.  Instead of clashing, these complementary colors highlight each other and make each other more vibrant.

Fabric-Inspired Combinationssection_landingpage_andersen_windows1-resized-600

A novel way to achieve a more “unique” color combination is to base it on fabrics.  Fabrics that combine more than one hue are already color coordinated.  For instance, upholstery with a rustic color combination can produce the same effect when applied to a room.  What is important when choosing a fabric to use as inspiration is the sentiment it evokes from a person.  This will produce a paint scheme that has a unique and personal connection to those who live in the house.

Conversing With The Experts

Those in the Massachusetts area can contact United Home Experts to talk about their color combination options.  Their expert house painters can explain how well a possible combination will go with the room’s function, the furniture and fabrics that may be found in the room, and the overall impression desired by the client.  They are also excellent at making imagination reality when it comes to paint and its myriad of color combinations.

Homeowners want the best for their houses, including the perfect siding option. The right siding adds to a home’s market value and helps in keeping upkeep to a minimum. A great choice but often-overlooked siding material is cement board.

What is Cement Siding?

This type of siding is made of cement, sand, fly ash and cellulose fibers. The fibers, made of wood, help to hold the siding materials together. This is the only type of house siding that contains cement material.

Types of Cement Siding

Cement boards are sold in mostly horizontal boards, however cement board sheets can be purchased for a varying siding look. Board sheets are often used for commercial purposes. Another option is shingles, however they are more difficult to apply.  Lap siding proves to be the most popular type, with boards measuring from 5 to 12 inches, creating an overlapping effect. If looking for the most highly recommended siding, fiber cement is the best option due to the pressure process used in making it. Cement sidings are sold in varying thicknesses, with the thinner having a rougher edge, but being easier to apply due to less weight. Most manufacturers sell the boards in as many as 22 various colors.

Prosfibercement-blogphoto33-resized-600

With different types and varying colors, cement siding provides variety for a homeowner. Due to its cement content, fire tests prove this type of siding to be the most fire-resistant. Although any material will burn, this type of siding is slow burning and allows a home’s residents time to put the fire out to get out safely. Cement siding also offers some of the best bug resistance, thus reducing the cost for expensive home exterminators for outside pests. This type of siding resembles wood, so those wanting a wood finish might prefer cement siding. Another benefit of this type of siding option is the fact that it can be painted. If 22 colors are not enough, homeowners have the option of painting the siding. Due to its thickness, cement is long-lasting and sturdy.

Cons

Many people find this type of siding difficult to apply. It is heavier than most, often requiring 2 people to place the siding. If not handled properly, pieces of the cement siding may break off. This siding costs more than most siding to apply, so may not be a wise option for those on a budget. If the siding is applied professionally, homeowners might find it to cost more due to the difficulty of application.

To see how much siding costs to install on your home, check out SidingMagazine.com’s Siding Calculator to get rough estimates online.

Generating ideas to paint your New England home is not an easy task.  Many people do not know where to start.  Others may have definite ideas but are unsure whether these ideas will actually be good when the paint has dried on their walls.  Because careful planning is important, here are some tips on how to pick the right colors and hopefully achieve satisfying results.

SW-ArtDIRColorTheory-resized-600

Wall Paint Color

Deciding the color of the wall paint is not always easy.  If a new home is to be painted, one needs to imagine how well it will go with the wall’s color.  Repainting the wall with a different color scheme may be somewhat easier but still rather difficult.  This is where color boards come in.  Place the fabric or piece of furniture the room will contain against it and see whether it is pleasing to the eye.

The Color Wheel

Aside from color boards, the color wheel is another excellent aid when making color choices.  Varying shades of color are arranged in such a way that color complements sit on opposite ends of the wheel.  Colors that look warm are close to each other and arranged according to how warm they are.  Across these are those cool colors arranged in a similar manner.  This wheel helps one make color combination choices.

Lighting

Different lighting affects colors in different ways.  Light from an incandescent source will make the colors look warm.  Fluorescent lighting, on the other hand, will make it appear cool.  Natural light will bring out the color’s actual hue.  Thus, if the walls are painted with a strong color, light from the window might make them too bright to the eyes.

Monochrome And Finishes

Painting a room with only one hue does not make it boring.  There are many ways to make it interesting.  One of these is varying the finish.  Surfaces with a satin finish will look different from those with matte finishes.  Warmer shades of the same color can also be paired with those with cooler hues.  Warmer shades are those closer to red, while cooler ones appear to be closer to blue.

The Flow Of Colorsw-levelbprocolorcollection-resized-600

Color in another room affects those in the rooms close to it.  It is important to think about how color flows from one room to another.  For instance, when one opens the door to another room, the color in the room he or she is in appears to be juxtaposed with those in the other room.  If this is not considered, the color may clash and have a jarring effect instead of a flowing one.

Purpose

Rooms have purpose, and the right paint scheme can aid in that purpose.  For instance, areas designed for relaxation can be given a calm and serene air if the colors used are soft, cool, and neutral.  These colors are not intense and contain more blue hues in them.

Talk To Professionals

There are people who are already familiar with how colors, finishes, and function go together.  In the New England area, the experienced professional painters at United Home Experts can provide helpful advice to homeowners’ ideas to paint your New England home.  They can also take these ideas and make them real by providing their clients with professionally painted interiors and exteriors.

There are many interior painting problems in the Boston area.  Two of the more common ones are sagging (also called “running”) and peeling.  Here are some of the reasons why they occur and a few simple solutions on how to solve them.

Sagging

Sagging can easily be seen as a drooping or dripping look in the paint. This is often the result of paint being applied too heavily.  In paint-sagging1-resized-600some cases, it may be because the paint was thinned too much before it was applied.  The environment during the application may also be too humid.  The simplest cause is the presence of dirt during the time of application.

Based on the causes mentioned, one can conclude that this problem is basically due to a lack of experience on the part of the painter.  This can often be seen in do-it-yourself paint jobs where the one applying the paint did not do enough research or have enough expertise.  If the paint is still wet, a brush or roller can easily even out the sagging paint.  If the paint has dried, light sanding may be necessary and an additional coat applied.

Peeling

Interior moisture can also cause paint to peel.  This can be seen as cracks or a gentle peeling of the paint from the material beneathSomerville-Levy, marvin & roof 009-resized-600 it.  This problem is most often found in bathrooms, bath tubs, kitchens, and wet basements.  These area are generally humid so large amounts of moisture is present in the air and affects the paint.

Peeling paint can also be caused by poor adhesion.  This means that the outer paint coat peels off from the inner coat.  The inner coat then becomes visible.  This can be the result of using oil-based paint on a surface that is still wet.  Lower quality paint may also be a possible cause of this.

This problem can be prevented by properly ventilating areas where moisture or humidity may build up.  If there are already peeling areas due to moisture, the old paint should first be removed before new paint is applied.  High quality acrylic latex may be a good paint to opt for if the humidity in the area cannot be lowered.  If the humidity problem is not addressed, either through better ventilation or more appropriate paint, the problem will recur.

Expertise

These two common paint problems occur because of a lack of knowledge and expertise on the part of the painter.  Those who do not have the time to learn how to do interior painting properly may turn to experts such United Home Experts for this type of job.  They are a reputable company with extensive experience and many satisfied customers in the Boston area.

Many people choose to be the interior painters of their own houses because they are leery of the expense of hiring a professional to do the job.  Unfortunately, they make unsightly painting errors.  When they can no longer tolerate looking at their mistakes, they get a professional to do a repaint.  Here are some of the errors that amateurs commit.

When Choosing Paint Implements

A common error among do-it-yourself painters is picking just any paintbrush for the job.  The type of paint often dictates the type of paintbrush to use.  For instance, paintbrushes made of a combination of nylon and polyester are best for latex-based types of paint.  The area to be painted will also indicate whether a brush or roller should be used.  Unfortunately, there are those who use brushes instead of rollers for large areas.

Estimating the amount of paint to use is also very important.  Those who lack prior interior painting experience often underestimate the amount needed.  This often leads to paying more or having too much wasted paint in the end.

Paint Slide

When Preparing The Work Area

Amateurs often miss things when preparing the work area.  Some furniture or portions of the floor are left uncovered.  It is surprising the places paint can drop onto.  For example, paint can splash on doorknobs that are not covered, leaving unsightly splotches or stains.  Sometimes paint cans are opened without being placed on top of a drop cloth to protect the floor.

Sufficient taping is often neglected as well.  Amateurs try to paint around the various woodwork, such as the windowsill and the doorframe, instead of taping these to produce straight lines.  They also forget to remove wall plates and light switches or to tape their edges.

Before painting, amateurs skip things like surface preparation.  The wall needs to be dry, free of imperfections, and primed.  When the painter is impatient and tries to finish the job quickly by making shortcuts the end result is an unsatisfactory paint job.

The inexperienced assume that the area to be painted on is already clean and do not go to the trouble of actually cleaning it to be sure.  Small imperfections are not patched prior to sanding and primer application.  At times, the patch is not allowed to dry sufficiently.  Even worse, some decide to paint without applying a primer first, a substance that helps paint adhere to the wall as well as bring out its color.

When Applying Paint

The proper way of using a paintbrush is not followed.  For instance, when applying latex-based paint, the brush should first be wet with water and shaken dry before being dipped in paint.  This step allows the brush to hold more paint.

Sometimes paint is also inadvertently allowed to build up on edge pads on the ceiling or corners.  If paint is not wiped off frequently from these, excess paint may accidentally mark the wrong surface.

Knowing when one should not paint is also essential.  If it is too humid, there is too much moisture in the air.  This moisture will prevent the paint from adhering properly to the surface being painted and result in problems later on, like sagging or blistering.

When Someone Else Does The Job

Knowing the mistakes amateurs commit will help one spot those pretending to be experienced professionals.  The expertise of those who know their trade is evident from the very start.  They make the proper preparations, they carefully execute the paint job, and they care for the objects in the work area.

The interior painters at United Home Experts embody the characteristics mentioned.  The amateurish mistakes indicated above are unheard of in jobs that they take. The many successful jobs and satisfied customers they have, not just in the Boston area but in all the other places they serve, make the company an excellent choice.

Some of the common interior and exterior painting problems faced by people in the New England, Massachusetts, and Rhode Island areas are blistering, mildew, and chalking. Here are some of the reasons why they occur and what may be done in these instances.

BlisteringSomerville-Levy, marvin & roof 009-resized-600

When medium-sized bubbles are found under the paint, these are called blisters. This is often found in trim or sidings made of wood. Sunlight sometimes causes the surface being painted to heat up. Vapor that rises becomes trapped during the painting process and results in these blisters. This is often the case when wood is being painted on because it absorbs moisture easily.

To solve this, the paint has to be scraped away. The wood or surface to be painted on should be allowed to dry so that no moisture remains. Painting is then done in non-direct sunlight, so choosing when to paint is important. The air should also be non-humid.

Mildew

Fungus that feeds and grows on paint is called mildew. It can be seen as spots that are black, green, brown, or grey in color. They are found under eaves and soffits. These are areas that have lesser ventilation. There is also little or no direct sunlight, so growth of this fungus becomes possible. It may also be caused by not priming the wood prior to painting it.

The mildewed areas should be cleaned using trisodium sulphate solution. A bleach and water solution may also be used instead. The ration is three parts water to one part bleach. It is important to wear rubber gloves and proper eye protection when doing this. After removing the mildew, the solution should be left for 10 to 15 minutes. Rinse the area then wash again with a detergent solution.

Chalking

When a powdery substance is found on the paint’s surface, this is called chalking. This normally occurs when paint is exposed to sunlight. If this occurs in the exterior of the house, the rain usually washes it away. Chalking may get out of hand at times. It then constitutes a problem if it affects the surrounding construction or people.

Excessive chalking is often caused by having too much thinner in the paint mix, using interior paint on the exterior, or not sealing porous surfaces before painting. Chalking can be removed easily, however, by power washing. Using the right paint and painting procedures is also important to prevent excessive chalking.

United Home Experts

These problems are rather straightforward to solve. Some of them can be prevented with the right knowledge and expertise. Those who do not have the time or inclination to do so may contact experts like United Home Experts to address their interior and exterior painting problems. This way they can be sure of a lasting and effective solution.

Looking for a siding company in Needham, Mass?  You’ve come to the right place. United Home Experts provides Vinyl, Cedar clapboard & shingles, Composite, and Fiber Cement Siding in Needham and the areas that surround it.  Here at United Home Experts we offer various types of siding that range in price and also make available payment programs to help you pay it off over time.

We know that times are difficult and some homeowners that are looking to revamp their homes cannot afford to pay for an entire project outright. Our consultants would love to tailor a free estimate just for your specific needs.

For information about our siding products, keep reading.  To obtain a free quote for your new siding project just follow this link or follow the button in the column.
Request a Free Estimate

Vinyl Siding Contractor in Needham Massachusetts

vinyl siding thumbnail2Standard vinyl siding is a widely used option for some people. Vinyl is easy to maintain, and offers a range of options, sizes, accessories, and patterns.  United Home Experts has completed numerous vinyl siding jobs in Needham, Mass. The styles of vinyl siding products we install are:
• Norandex Insulated vinyl siding
• Exteria Vinyl Shakes
• Regular vinyl siding from Norandex
• Shutters, Soffits, PVC Coil Stock, Door Accessories, Decorative Headers and Other Accessories
For more details:Request a Free Estimate

Fiber Cement Board Siding in Needham, MA

fiber cement thumbnail1United is experienced in Cement Siding Fiber Cement Siding.  Cement Siding Fiber Cement Siding is a resilient, low maintenance siding product that is perfect for the climate in Needham,MA and the neighboring communities.  in the past decade, United has completed hundreds of fiber cement installations in Eastern New England, including some in Needham, Mass.  For other information about our Fiber Cement Board Siding services:

More on Fiber Cement Siding

Cedar Clapboard & White and Red Cedar Shakes in Needham, Mass

cedar thumbnailAlthough it’s not as common as it once was quite a few homes in Needham, MA still have Red Cedar Siding or Cedar Shingles.  At United Home Experts we know there is a use for every kinds of siding ,for example Wood Clapboard & White and Red Cedar Shakes.  UHE has been fixing and putting up Wood Clapboard & Cedar Shingles in the Needham region and surrounding communities for well over 12 years. We know why some still opt for the cedar siding and don’t blame them.

More on Cedar Siding and Shingles

Looking for a siding company in Medway, MA?  You’re in the right place. UHE supplies and installs Vinyl, Wood, Polymeric, and Cement board siding in Medway and the surrounding region.  At United we offer exterior siding options that fit all budgets and also make available financing options to help make your project more affordable.  For information about our siding products, keep reading.  To request a free estimation for your new siding just follow this link or follow the button in the side column.

Request a Free Estimate

vinyl siding thumbnail2Regular vinyl siding is a common alternative for some individuals. Vinyl is low maintenance, and is available in a range of options, shapes, components, and patterns.  Our company, United has produced a lot of vinyl siding jobs in Medway, Massachusetts. The kinds of vinyl systems we install are:
• Foam-backed vinyl siding
• Cedar Shingle Style Vinyl Shingles
• Standard vinyl siding
• Vinyl Shutters, Soffits, Aluminum Fascia, Door Accessories, Decorative Headers and Other Accessories

fiber cement thumbnail1UHE focuses on Cement Board Siding.  Fiber Cement Board Siding is a well-constructed, low maintenance material that’s just right for the environment in Medway,MA and New England.  Over the past decade, United Home Experts has performed several hundred Fiber Cement Board Siding projects in Eastern New England, including some in your town of Medway.  For additional information about our FCboard Siding services:More on Fiber Cement Siding

 

cedar thumbnailDespite the fact that it’s not as preferred as it used to be quite a few homes in Medway, Mass still have Red Cedar Siding or Cedar Shingles.  At UHE we feel there is a use for every  forms of siding including Wood Clapboard & Shingle Siding.  Our company, United has been renovating and providing installation of Red Cedar Siding & Cedar Shingles in the Medway vicinity and surrounding regions for more than 12 years

More on Cedar Siding and Shingles